Tontec 3.5 inch touch screen module is designed especially for Raspberry Pi 2 and Raspberry Pi B+. It transmits data though GPIO, SPI (Serial Peripheral Interface) on the P1 interface at maximum speed 128MHz. The CPLD on the display module controls display content according to the data transmitted from the SPI interface.
Notice: Raspberry Pi unit NOT included!
Notice 2: This touchscreen only support Raspbian but not Win 10
Specification
Easy to set up
Physical Resolution: 480x320 pixels, 16bit, 65K color
3.5 inch resistive touch screen
LCD Display transmits data through SPI (clock maximum speed: 128 MHz)
Touch panel transmits data through SPI (clock maximum speed: 16 Mhz)
No external power supply needed
Built-in EEPROM storage unit
Open source Linux driver
Easy to set up
Physical Resolution: 480x320 pixels, 16bit, 65K color
3.5 inch resistive touch screen
LCD Display transmits data through SPI (clock maximum speed: 128 MHz)
Touch panel transmits data through SPI (clock maximum speed: 16 Mhz)
No external power supply needed
Built-in EEPROM storage unit
Open source Linux driver
Tontec display module is built with a high speed CPLD chip (EPM3032), a SPI interfaced 4-wire resistive touch screen control chip (XPT2046), and an I2C interfaced EEPROM memory storage unit (AT24C02).
Package Include
1*Tontec 3.5 inch Touch Screen
1*Tontec Case for Raspberry Pi 2 Model B and Raspberry Pi B+
1*Tontec 3.5 inch Touch Screen
1*Tontec Case for Raspberry Pi 2 Model B and Raspberry Pi B+
No comments:
Post a Comment